This site uses cookies.
Some of them are essentials while other help us improve your experience. Read Our Privacy Policy

Persistent Surveillance

Tactical UAVs can be used to provide persistent surveillance, monitoring and observing large areas so that possible threats can be automatically detected and the appropriate response taken. UAVs equipped with CONTROP wide-area surveillance payload (WASP)  allow operators to see live high-resolution imagery supported by on board AI algorithm that highlight moving targets and can capture multiple threats simultaneously over wide areas.

CONTROP’s 1.3kg STAMP-VMD provides visual coverage of a 1 sq. km area in real time and at high resolution. Owing to its low SWaP design, this payload can be integrated onto Group 1 UAVs. The STAMP-VMD is fitted with a unique integrated sensor processor that carries out onboard image processin. Onboard detection algorithms enable the use of standard datalink and minimal bandwidth to send only the relevant data to the operator at the ground station. Once combined with a targeting payload, the STAMP-VMD will provide wide-area surveillance and target detection capability.  While the second payload will investigate the targets and enable targeting operation.

STAMP Family

T-STAMP-XD

T-STAMP-XD

A three gimbal gyro-stabilized system with advanced image processing which includes the following sensors:Thermal Imaging Camera using an uncooled 3-5μ IR detector and a High sensitivity HD CMOS color Day Camera with a continuous zoom lens. *Detection range to NATO target

T-STAMP-XR

T-STAMP-XR

A three gimbal gyro-stabilized system which includes the following sensors: Thermal Imaging Camera using an uncooled 3-5μ IR detector and a High sensitivity HD CMOS color Day Camera with a continuous zoom lens. *Detection range to NATO target

M-STAMP NG

M-STAMP NG

A three (3) gimbal gyro-stabilized system which includes the following sensors: High performance Thermal Imaging (TI) Camera using an uncooled 8-12μ IR detector lens and a High sensitivity HD CMOS color Day Camera with a continuous zoom lens. *TI Detection range to NATO target

D-STAMP-HD

D-STAMP-HD

A miniature, lightweight, electro-optical, stabilized, airborne sensor designed to be carried by a miniature UAV, for tactical "Over-the-Hill" reconnaissance in daylight. It provide small UAVs with the image quality of large UAV payloads all in one miniature camera system.

Learn More About STAMP Family